Relationship between workplace violence and mental/physical health of security guards during the COVID-19 pandemic in Taiwan.

Objectives: To investigate the relationship between workplace violence (WPV) and mental and physical health (MPH) of security guards during the COVID-19 pandemic in Taiwan. Methods: A cross-sectional survey was conducted in 15 representative security companies across northern, central, and southern Taiwan, and outlying islands from July 2021 to June 2022 during the COVID-19 pandemic. 1,200 questionnaires were distributed. A total of 1,032 valid questionnaires were collected. Results: 13.18% of the participants reported that they had experienced WPV during the COVID-19 pandemic, including physical violence (PhV), psychological violence (PsV), verbal violence (VV), and sexual harassment (SH). The most common violence was VV (54.19%), followed by PsV (20.69%). Community residents and property owners were the primary perpetrators, followed by strangers. The study showed that the security guards who had experienced WPV had higher scores on the 12-item Chinese Health Questionnaire (Taiwan version) (CHQ-12), indicating poorer MPH than those who had never experienced WPV. The result showed that VV had strong correlations with the lack of effective communication, dissatisfaction with treatment and service attitude, and work stress. PsV was strongly associated with excessive waiting times. Conclusion: There were correlations among PhV, VV, and PsV and they had adverse impacts on MPH, except for SH. The study found that the primary perpetrators of WPV against security guards were community residents and property owners. The causes were the lack of effective communication, dissatisfaction with treatment and service attitude, excessive waiting times, and work stress, which further led to turnover intention and poor MPH. The findings of this study have useful implications and it is recommended to enhance the understanding of workplace violence against security guards and to formulate appropriate local and international strategies to address it.

Luteolin Reduces Aqueous Extract PM2.5-induced Metastatic Activity in H460 Lung Cancer Cells.

Fine particulate matter (PM2.5) is the critical cause of lung cancer and can further promote tumor cell migration and invasion. This study investigated the effects of luteolin, an antiangiogenic flavonoid agent, on blocking aqueous extract PM2.5-prompted cancer progression. We observed that luteolin reduced cell migration and the expression of pro-metastatic factors pro-matrix metalloproteinase (MMP)-2 and intercellular adhesion molecule (ICAM)-1 in PM2.5-exposed H460 lung cancer cells. Luteolin treatment also reduced the transduction of PM2.5-induced epidermal growth factor receptor (EGFR)-phosphatidylinositol 3-kinase (PI3K)-protein kinase B (AKT) cascade signaling. Furthermore, the reduction of MMP-2 expression and ICAM-1 production by luteolin in PM2.5-stimulated H460 cells is EGFR-PI3K-AKT pathway dependent. These results suggest that luteolin exhibits antitumor progression by inhibiting EGFR-PI3K-AKT pathway.

Particulate matter 2.5 exposure induces epithelial-mesenchymal transition via PI3K/AKT/mTOR pathway in human retinal pigment epithelial ARPE-19 cells.

Exposure to particulate matter 2.5 (PM2.5) has been linked to ocular surface diseases, yet knowledge of the molecular mechanism impacted on retina pathogenesis is limited. Therefore, the purpose of this study was to explore the effects and involved factors of PM2.5 exposure in human retinal pigment epithelial APRE-19 cells. Our data revealed a decreased cell viability and an increased migratory ability in APRE-19 cells after PM2.5 stimulation. The MMP-2 and MMP-9 protein levels were markedly increased while the MMPs regulators TIMP-1 and TIMP-2 were significantly reduced in PM2.5-exposed APRE-19 cells. PM2.5 also increased pro-MMP-2 expression in the cell culture supernatants. Additionally, PM2.5 promoted the EMT markers through the activation of PI3K/AKT/mTOR pathway. Moreover, the ICAM-1 production was also remarkably increased by PM2.5 but reduced by PI3K/AKT inhibitor LY294002 in APRE-19 cells. Taken together, these results suggest that PM2.5 promotes EMT in a PI3K/AKT/mTOR-dependent manner in the retinal pigment epithelium.

Fine particulate matter PM2.5 generated by building demolition increases the malignancy of breast cancer MDA-MB-231 cells.

OBJECTIVES: This study investigates the effects of water-extracted PM2.5 on a triple-negative breast cancer (TNBC) cell line, MDA-MB-231, by sampling suspended particulates around a building demolition site. METHODS: PM2.5 particles were obtained using a high-flow TISCH sampler. Water-soluble PM2.5 were extracted by an ultrasonic oscillator and then freeze-dried. The heavy metal components of soluble PM2.5 was analyzed by ICP-MS. Cell viability was evaluated by MTT assay for cells that were exposed to PM2.5 (200, 400 and 600 µg/mL). Wound healing and transwell cell migration and invasion assays were used to measure cell motility and the invasiveness of cancer cells that had been exposed to PM2.5 into a chemo-attractant substance. Interrelated mechanisms of cancer malignancy were analyzed by Western blot analysis. RESULTS: Nearby PM2.5 concentrations increased significantly during the deconstruction of buildings, and the Cd, Cu, Pb, Zn and Cr contents of soluble PM2.5 also significantly increased. Following exposure to PM2.5, the survival rate of breast cancer cells was significantly higher than that of the control group. Soluble PM2.5-treated cells had a higher migration capacity. The signaling pathway of FAK/PI3K/AKT proteins was more activated in PM2.5-treated cells than the control group. Increased levels of Aurora B and Bcl-2 were associated with cell proliferation. Elevated levels of cathepsins D, ß-catenin, N-cadherin, vimentin and MMP-9 were associated with breast cancer cell metastasis. CONCLUSION: Soluble PM2.5 from building demolition may promote/progress in surviving TNBC cells, increasing the malignancy of breast cancer. This study offered evidence of a link between demolition PM2.5 and cancer progression.

Size distribution and antibiotic-resistant characteristics of bacterial bioaerosol in intensive care unit before and during visits to patients.

Airborne bacteria in hospitals have been implicated in nosocomial infections. This investigation studied the characteristics of airborne bacteria and the effect of patient visitation on the bacteria profile in intensive care units (ICUs). Air at a medical ICU and surgical ICU was sampled for one year. Airborne bacteria before and during visits to patients in ICUs were collected using a Six-Stage Viable Andersen Cascade Impactor to analyze the concentration and size distribution of airborne bacteria and the percentage thereof that were antibiotic-resistant. During patient visitation in the ICUs in this study, the number of visitors was 20-80. Airborne bacteria concentration during visiting hours (total averaging 168.5 CFU/m3) was three to four times than before visiting hours (p = 0.043). With increasing the visitors, most of the airborne human-associated bacteria (HAB) concentrations during visitations were higher than before visitations in each season. The two-way ANOVA of HAB concentration before and during visitation (p = 0.028) of combining MICU and SICU in various season (p = 0.007) all revealed statistical agreement. The proportion of particles, from 1.1 to 4.7 µm, during the visits was almost 1-2.4 times that before the visits in most sampling periods (p = 0.028). In addition, the opportunistic pathogens such as Micrococcus spp., Staphylococcus spp. and Acinetobacter spp. were found in the air during visiting times. Small proportions of some environmental strains with a high antibiotic-resistance percentage (42-78%), including Brevundimonas spp., Elizabethkingia spp. and others, were detected during patient visitation. Patient visitation activities affect the bacterial profile in air in ICUs. During the visitation, visitors might bring or generate bacteria into ICUs. Limiting the number of patient visitors to ICUs, wearing respirators and gowns or increasing ventilation rate during and after patient visitation is required to maintain indoor air quality and probably decrease the risk of patient infection.

Development and evaluation of a novel personal sampler for PM1 using rotating porous media.

A rotating filtration device (RFD) that is filled with porous media is developed for sampling particulate matter with a diameter of 1 µm or less (PM1). An experiment is conducted on a test system using corn oil as a test aerosol. The RFD was evaluated using an aerodynamic particle sizer. The results yielded cutoff sizes of 1.68 µm and 1.04 µm at rotational speeds of 0 rpm and 9000 rpm, respectively, with foam with 80 pores per inch (ppi), a thickness of 80 mm, and a face velocity of 13.5 cm/s. When the foam was replaced with 94 ppi nickel mesh, the cutoff size decreased from 1.45 µm to 0.98 µm as the thickness increased from 17 to 68 mm. As the face velocity of the RFD increased from 13.5 to 108.3 cm/s, the cutoff size declined from 1.04 µm to 0.77 µm. Most of the changes in the cutoff sizes of the RFD were statistically significant (p < 0.05). The maximum pressure drops through the foam and the nickel mesh were 33.5 and 36.6 mm H2O, respectively. The experiment revealed that increasing the rotational speed and face velocity of the RFD, and the thickness and nominal size of the porous media reduced the penetration of oil aerosols.

A Murine Model of Acute Allergic Conjunctivitis Induced by Continuous Exposure to Particulate Matter 2.5.

Purpose: Several pieces of epidemiologic evidence have indicated PM2.5 (particulate matter with a diameter of 2.5 µm or less) as a causing factor of allergic conjunctivitis, but without experimental elucidation of mechanism. In the present study, PM2.5 in solution was directly applied to the mouse ocular surface to elucidate whether PM2.5 might cause allergic conjunctivitis, and its underlying mechanisms were analyzed. Methods: ICR mice were challenged for 18 consecutive days with eye drops containing PM2.5 at 3.2, 6.4, and 12.8 mg/mL in 0.9% NaCl saline, along with the controls prepared in parallel without PM2.5 and another control group treated with both PM2.5 at 12.8 mg/mL and artificial tears. On day 19, the whole eyes and meibomian glands were harvested for histopathological analyses and assessment of clinical scoring, tear volume, tear breakup time, and tear ferning. Furthermore, goblet cells by periodic acid Schiff stain and infiltrated eosinophils by Giemsa stain were quantified and compared among study groups. Results: Clinical scoring showed more eyelid edema, tearing, and scratching behaviors, with longer tear breakup time under the influence of increased PM2.5 concentrations. Tear ferning assay showed less tear crystal formation and decreased crystal branches after exposure to PM2.5. In addition, higher goblet cell density in the upper palpebral conjunctiva and extensive eosinophil infiltration in the entire conjunctiva and in the meibomian glands were induced by PM2.5. Conclusions: These results demonstrate that PM2.5 can induce symptoms similar to clinical allergic conjunctivitis and that the murine acute allergic conjunctivitis model can be induced by direct exposure to PM2.5.

Filter quality of electret masks in filtering 14.6-594 nm aerosol particles: Effects of five decontamination methods.

This study investigates the effects of five decontamination methods on the filter quality (qf) of three commercially available electret masks-N95, Gauze and Spunlace nonwoven masks. Newly developed evaluation methods, the overall filter quality (qf,o) and the qf ratio were applied to evaluate the effectiveness of decontamination methods for respirators. A scanning mobility particle sizer is utilized to measure the concentration of polydispersed particles with diameter 14.6-594 nm. The penetration of particles and pressure drop (Δp) through the mask are used to determine qf and qf,o. Experimental results reveal that the most penetrating particle size (MPS) for the pre-decontaminated N95, Gauze and Spunlace masks were 118 nm, 461 nm and 279 nm, respectively, and the respective penetration rates were 2.6%, 23.2% and 70.0%. The Δp through the pretreated N95 masks was 9.2 mm H2O at the breathing flow rate of heavy-duty workers, exceeding the Δp values obtained through Gauze and Spunlace masks. Decontamination increased the sizes of the most penetrating particles, changing the qf values of all of the masks: qf fell as particle size increased because the penetration increased. Bleach increased the Δp of N95, but destroyed the Gauze mask. However, the use of an autoclave reduces the Δp values of both the N95 and the Gauze mask. Neither the rice cooker nor ethanol altered the Δp of the Gauze mask. Chemical decontamination methods reduced the qf,o values for the three electret masks. The value of qf,o for PM0.1 exceeded that for PM0.1-0.6, because particles smaller than 100 nm had lower penetration, resulting in a better qf for a given pressure drop. The values of qf,o, particularly for PM0.1, reveal that for the tested treatments and masks, physical decontamination methods are less destructive to the filter than chemical methods. Nevertheless, when purchasing new or reusing FFRs, penetration should be regarded as the priority.

Physicochemistry and cardiovascular toxicity of metal fume PM2.5: a study of human coronary artery endothelial cells and welding workers.

Occupational exposure to welding fumes causes a higher incidence of cardiovascular disease; however, the association remains unclear. To clarify the possible association, exposure assessment of metal fumes with an aerodynamic diameter of <2.5 µm (PM2.5) in welding and office areas was characterized in a shipyard in Taiwan. Cardiovascular toxicity caused by PM2.5 was determined in workers (in both the welding and office areas). Significant amounts of bimodal metal fume particles with count median diameters (CMDs) of 14.1~15.1 and 126.3~135.8 nm were produced in the shipyard. Metal fume PM2.5 resulted in decreased cell viability and increased levels of 8-hydroxy-2'-deoxyguanosine (8-OHdG), interleukin (IL)-6, and nitric oxide (NO) in human coronary artery epithelial cells (HCAECs). We recruited 118 welding workers and 45 office workers for a personal PM2.5 exposure assessment and determination of urinary levels of 8-OHdG, 8-iso-prostaglandin F2α (8-iso-PGF2α), and various metals. We observed that a 10-µg/m(3) increase in the mean PM2.5 concentration was associated with a 2.15% increase in 8-OHdG and an 8.43% increase in 8-iso-PGF2α in welding workers. Both 8-OHdG and 8-iso-PGF2α were associated with Fe and Zn in the urine. In conclusion, metal fume PM2.5 could increase the risk of cardiovascular toxicity after inhalation.

Effects of uniformities of deposition of respirable particles on filters on determining their quartz contents by using the direct on-filter X-ray diffraction (DOF XRD) method.

In this study, field samplings were conducted in three workplaces of a foundry plant, including the molding, demolding, and bead blasting, respectively. Three respirable aerosol samplers (including a 25-mm aluminum cyclone, nylon cyclone, and IOSH cyclone) were used side-by-side to collect samples from each selected workplace. For each collected sample, the uniformity of the deposition of respirable dusts on the filter was measured and its free silica content was determined by both the DOF XRD method and NIOSH 7500 XRD method (i.e., the reference method). A same trend in measured uniformities can be found in all selected workplaces: 25-mm aluminum cyclone>nylon cyclone>IOSH cyclone. Even for samples collected by the sampler with the highest uniformity (i.e., 25-mm aluminum cyclone), the use of the DOF XRD method would lead to the measured free silica concentrations 1.15-2.89 times in magnitude higher than that of the reference method. A new filter holder should be developed with the minimum uniformity comparable to that of NIOSH 7500 XRD method (=0.78) in the future. The use of conversion factors for correcting quartz concentrations obtained from the DOF XRD method based on the measured uniformities could be suitable for the foundry industry at this stage.

Evaluation of exhalation valves.

Certification tests currently employed by some industrialized nations to certify respirators require that when challenged with air flow at a constant suction head of 25 mmH2O, the leakage into the facepiece from the exhalation valve(s) should not exceed 30 ml min(-1). However, the test alone might not reflect the leakage rate under different levels of vacuum. To study the characteristics of leakage through exhalation valves, a leakage meter was built to measure the leakage rate of four brands of exhalation valves. Seven valves of each brand were tested for leakage rate at pressure drops ranging from 15 to 45 mmH2O (or extended to 75 mmH2O for some valves). Two types of leaks, i.e. fiber insertion and arch dent on the valve seat, were used to investigate the effect of leak shape on the characteristic leak flow as a function of pressure drop. A leakage data point represented a mean value of five measurements. The results showed that the leakage rate could increase or decrease with increasing pressure drop inside the respirators, indicating that the current method of conducting leakage tests, at a constant suction head of 25 mmH2O, does not guarantee better protection than when the respirators are used at a lower suction head. Moreover, based on the sample valves tested in this study, it was found that valve leakage was mostly caused by defects in the valve seats. Both fiber-insertion and arch-dent leaks had either increasing or decreasing characteristic curves, depending on the size of the leak and the material of the valve membrane.